Texture image

Product Catalog

0 Item in Quote
Qacc main 1400

Machine QA

QA CrossChecker™

Comprehensive Beam Verification and Analysis.

QA CrossChecker™ part of complete solution for: Monthly QA CyberKnife

QA CrossChecker™ Overview

Optimized Detector Positioning For Key Linac QA Routine

  • 453 air-vented pixel ionization chambers with optimized 5 mm spacing allows for accurate machine QA including dosimetric, mechanical, gating and MLC performance testing.
  • Parallel readout from independent electrometers allows for fast measurements.

Water Phantom Free

  • Compare results to water phantom baselines and achieve accuracy within 0.5%.
  • Perform accurate monthly machine QA without the hassle of a water phantom.

Pair With Software For Lightning Fast Reports

  • Automatically compare energy measurements with their corresponding reference values.
  • Test reports are created according to user-defined tolerances.
  • Reports include reference values, allowing you to easily identify changes in your machine.

Hardware General Requirements

  • Warm-up time
    15 min for relative; 60 min for absolute
  • Pre-irradiation
    According Pre-irradiation
  • Cooling
    Forced air cooling via two fans
  • Uniformity correction
    Via an individual factory calibration matrix, determined with 60Co radiation, stored in the device

Hardware General Specification Data

  • Application
    Routine QA of high energy photon and electron beams
  • Positioning
    Gantry mount (holder optional) or patient table
  • Measuring Quantity
    Absorbed dose, dose rate
  • Energy Range
    60Co, 4 MV-30 MV Photon; 4 MeV-21 MeV Electron
  • Intrinsic build-up
    3 mm Tecaran ABS, density 1.06 g/cm³
  • Backscatter material
    RW3, thickness 22 mm
  • Dose rate range
    0.02-20 Gy/min
  • Signal to noise ratio
    Less than 1 % with 1 cGy integrated dose
  • Dose linearity
    Tested to be better than 0.5 % from 10 cGy to 5 Gy integral dose and better than 0.5 % from 0.1 Gy/min up to 4 Gy/min dose rate
  • Output factor
    Within 1 % from 5 x 5 to 25 cm field size compared to CC13 between 6 and 18 MV
  • Outer Dimensions
    56 cm (L) x 6 cm (H) x 32 cm (W)
  • Weight
    ~10 kg
  • Power Supply
    ~10 kg
  • Power Supply
    100-240 V
  • Frequency
    50/60 Hz
  • Power Cord, Plug
    US or German power plug included
  • Interface to PC
    Point To Point or network Ethernet connection

Videos

Tech Notes

Please sign in or register to the customer care portal to view tech notes.

Have Questions About the QA CrossChecker™?

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Request Pricing for Complete CyberKnife Solution

Filmless and finished in under 10 minutes. Receive more information about CyberKnife QA Solutions.

Learn more about Standard Imaging CyberKnife

Join our Mailing List